|
2RxPRO
&
2RxPRO-S
DUAL CHANNEL AIS RECEIVERS
Just released, the
2RxPRO-S
shares all the great features of the original 2RxPRO - a
TRUE DUAL CHANNEL AIS Receiver,
with
integral NMEA0183
mux and
NMEA AND USB outputs.
And then it adds a built-in antenna
splitter so you can share an existing VHF antenna - what could be
simpler?
Both units
feature industry-leading, pro-quality sensitive digital radio receivers
that monitor
both AIS channels simultaneously,
so you
do not miss messages
or
have to wait for the data to be eventually received
(as is the case with all single channel AND switched single channel
receivers.)
No setup is required
- just install a suitable VHF antenna (or use an existing one with the
-S),
9-28v power
(only 1watt consumption at 12v) and connect to your PC or plotter using the USB and
NMEA0183 outputs. And if you are running out of NMEA ports, the
2RxPRO
&
2RxPRO-S
can also take in a NMEA feed at 4800 baud from your GPS or other
instrument, and multiplex the data in with the AIS data going off to
your plotter -
so you don't even need another NMEA port to install it!
2RxPRO
Data
sheet=>
2RxPRO-S
Data Sheet=>
|
 |
The
2RxPRO only weighs 220g
and measures just
110 x 80 x 32mm! |
Receives on
both AIS channels
ALL THE
TIME!
The 2RxPRO
features a very robust, professional-grade
water-resistant metal case,
and integral power and NMEA cables to make installation as easy as it
gets!
Features the same excellent sensitivity as our professional grade,
fully-approved AIS transponders
Built-in antenna splitter (-S
version only)
Built-in mux to combine NMEA data from another instrument
Built in USB port as well as NMEA 0183
Works with 12 or 24 volt systems |
 |
SevenStar Electronics Ltd
